Platinum 2000 Litre Horizontal Bunded Heating Oil Tank

Platinum Tanks range of bunded oil tanks are manufactured from UV stabilised linear low density polyethylene to protect the product from UV degradation. A standard 1” BSP outlet is extended from the inner oil tank through the bund for ease of installation. The inner tank comes fitted with a gauge bung which can be removed in order to fit an ultrasonic sensor at a later date.

The single skin inner tanks are manufactured to European Standard EN13343. Note: Currently there is no European Standard for bund outers, the standard is in progress at the moment and when it becomes law, all Platinum Bund outers will be tested to this standard. Both the inner tank and bund outer are manufactured to the ISO 9001:2015 quality standard. Each product is visually inspected for defects throughout production and prior to loading. All single skin liquid storage tanks are pneumatically pressure tested to ensure maximum product quality.

Fuel storage tanks are not suitable for the storage of drinking water however all fuel storage tanks can be manufactured from potable grade material. Please view the water storage section or contact sales for more information.

Warning: To ensure uniform loading of the product, liquid storage tanks must be installed on a flat non-deformable, non-combustible base which extends 300mm from the product on all sides. When full an oil tank will expand, a gap of 100m should be left surrounding the product to accommodate this expansion. To avoid leakage, the 1” outlet must be held while fitting the pipework to the tank. Failure to meet these requirements will void all warranties on the product.