Veria Flexicable 10 189B6112 Twin Conductor Underfloor Nordic Heating Cable, 700W

Features and benefits

• Low installation height:  Veria Flexicable 10 has a continuous effect of 10 W/metre, which, combined with its low installation height of just 4 mm, makes the Veria Flexicable 10 the ideal choice when renovating an existing floor. The cable can be installed directly on the substrate. The easiest way to affix it is by using VeriaFix double-sided tape or similar, although it can also be secured using a glue gun.
• Top-notch safety: The heating cable is equipped with a fully protective aluminium screen, which is connected to the earth connection of your electrical installation. Should the cable break unexpectedly, the built-in screen connection will immediately shut down the system – without any risk to people or animals.
• Select the correct output: The area that a given cable can cover depends on the desired output per square metre, and thus on which c-c distance cables are installed with it. The recommended output depends in part on the room’s insulation, and partly on the floor’s surface and substrate materials.
• Veria Flexicable 10 is a 2-conductor underfloor heating cable that can be used for both primary and secondary heating.
• Depending on your floor construction you are free to choose the output level you need to fulfil your heating requirements. Please follow the guidelines below.
• The area that a certain cable length covers depends on which output you need, and consequently which centre-to-centre (C-C) distance the cable installation requires
• Note that the heating cable must be connected to the power supply by an authorised electrician.